Part Number Hot Search : 
AM79C D121J 1N4746 16253P4 AP3P090N TC5022 04221K DP64L4Y2
Product Description
Full Text Search
 

To Download EV32C1E1A2-35328MTR Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 Marketing Bulletin
DATE: TO: FROM: RE:
Thursday, November 01, 2001
Affected Customers Marketing EV32C1 Series Termination
To all concerned parties, This bulletin is to notify all customers of the discontinuation of the EV32C1 series Ecliptek oscillator effective Thursday, November 01, 2001. In compliance with our End of Life (EOL) policy, this notice will serve as advanced notice of product termination. New orders will not be accepted after Friday, February 01, 2002, with delivery to be conclude by Tuesday, April 30, 2002. The EV32C3 OR EV32C6 series is a recommended alternate for the EV32C1 series. This may not be an exact cross, so it is highly recommended that the data sheet(s) of the recommended alternate are reviewed and samples tested to ensure conformance. If there are any questions pertaining to this bulletin, please contact your Ecliptek sales representative. Thank you again for your cooperation.
Ecliptek Marketing
3545 CADILLAC AVENUE * COSTA MESA, CA 92626-1401 * (714) 433-1200 * Fax (714) 433-1234
STANDARD SPECIFICATIONS
Frequency Range (FO) Frequency Tolerance & Stability / Operating Temperature Range (OTR) (All Values Inclusive of OTR, Vdd, and CLOAD, with VC = 1.65VDC) Code A B D E F H J 16.384MHz to 44.736MHz (See TEN08-563-800 for a list of standard frequencies) Not Specified over 0C to +70C Not Specified over -40C to +85C 50ppm Max. over 0C to +70C 25ppm Max. over 0C to +70C 20ppm Max. over 0C to +70C 50ppm Max. over -40C to +85C 25ppm Max. over -40C to +85C -55C to +125C 3.3VDC 10% / 15mA Maximum 90% of VDD Minimum 10% of VDD Maximum 5nSec Maximum (20% to 80% of waveform) 50% 10% (@ 50% of waveform) 50% 5% (@ 50% of waveform) 15pF HCMOS Load Maximum 10 mSec Maximum / 2ppm/1st year Typical, 10ppm/10 years Maximum -70dBc/Hz, -100dBc/Hz, -130dBc/Hz, -147dBc/Hz, -152dBc/Hz, and -155dBc/Hz Not Specified 20ppm Minimum 32ppm Minimum 50ppm Minimum 80ppm Minimum 100ppm Minimum 20% Maximum 15% Maximum 10% Maximum 1.65VDC 1.35VDC (0.3VDC to 3.0VDC ) 0.0VDC to VDD / Positive Transfer Characteristic 50kOhms Typical 10kHz Minimum (-3dB, VC = 1.65VDC) Listed in TQC41-883-007 Listed in TQC41-883-008 Listed in TQC41-883-003 Listed in TQC41-883-004 / 95% coverage Listed in TQC41-883-001
Storage Temperature Range (STR) Supply Voltage (V DD) / Input Current (I DD) Output Voltage Logic High (VOH) Output Voltage Logic Low (VOL) Rise/Fall Time (TR/TF) Duty Cycle (SYM) Load Drive Capability (CLOAD) Start Up Time (TS) / Aging (@ 25C) Typical Phase Noise (at offsets 10Hz to 1MHz) Period Jitter: RMS (TJRMS) Absolute Pull Range (APR) [All Values Inclusive of OTR, Vdd, CLOAD, and Aging over Control Voltage Range (VC)]
1 2
Linearity
1 2 3 4 5 A B C
Control Voltage Range (V C) / Test Conditions forAPR Control Voltage Range (V CR) / Transfer Function Input Impedance (Z I) Modulation Bandwidth (MBW) Shock: Vibration: Seal Integrity: Solderability: Marking Permenancy: Conditions Conditions Conditions Conditions Conditions
ENVIRONMENTAL & MECHANICAL
and Criteria and Criteria and Criteria and Criteria and Criteria
PART NUMBERING GUIDE
EV32C1 D 2 A 1 - 35.328M TR
Packaging Options Blank = Tubes (CPA74-004-000) Frequency TR = Tape & Reel Duty Cycle 3 4 2.60 5.00 (CPA70-161-000) 1 = 50 10% 0.15 0.15 2 = 50 5% 2 1 Linearity A = 20% Maximum, B = 15% Maximum, C = 10% Maximum 1.4 1.2 Absolute Pull Range (APR) 0.1 3.68 0.2 1 = 20ppm Minimum, 2 = 32ppm Minimum 0.15 3 = 50ppm Minimum, 4 = 80ppm Minimum 5 = 100ppm Minimum Frequency Tolerance & Stability / OTR PIN CONNECTION A = Not Specified over 0C to +70C 1 Control Voltage (VC ) 1.60 0.20 B = Not Specified over -40C to +85C 2 Ground/Case Ground D = 50ppm Max. over 0C to +70C 3 Output E = 25ppm Max. over 0C to +70C 4 Supply Voltage All Dimensions In Millimeters F = 20ppm Max. over 0C to +70C H = 50ppm Max. over -40C to +85C SPECIFICATION CONTROL DRAWING J = 25ppm Max. over -40C to +85C
7.00 0.15
5.08 0.15
MARKING GUIDE
(Line #1) ECLIPTEK (Line #2) XX.XXXM
Frequency
Title
Drawing Number
CSC12-560-000
CERAMIC SMD 3.3V HCMOS/TTL VCXO
Revision Effectivity Date
(Line #3) XX Y ZZ
ECLIPTEK XX.XXXM XXYZZ
B
ECN Number
Week of Year Last Digit of Year Ecliptek Manufacturing Code (Per TEN02-001-000)
5632
Approved By
PAGE 1 OF 2
Date Released By Date
NOTE: Pin 1 shall be marked with a dot. Marking shall
conform to conditions listed in TQC41-001-000.


▲Up To Search▲   

 
Price & Availability of EV32C1E1A2-35328MTR

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X